Datasheet

6 Specifications are subject to change without notice (30.09.2011)
Delivery Contents
• Photoelectric switch: PA 18 C.D...
• Installation instruction on plastic bag
• Screwdriver
• Mounting bracket APA18-MB1
• 2 M18 locknuts
• Packaging: Plastic bag
To avoid interference from inductive voltage /
current peaks, separate the proximity switch
cables from any other power cables. E.g.
Engine, contactor or solenoid cables
I
ncorrect
Correct
The cable should not be pulled
A proximity switch should not serve
as mechanical stop
Any repetitive flexing of the
cable should be avoided
Relief of the cable strain Protection of the sensing face Sensor mounted on a mobile carrier
I
ncorrect
>
100 mm
CorrectCorrect
I
ncorrect
Installation Hints
Accessories
• Connector type CONG1A.. / CONM14NF.. series