Datasheet

6
Carlo Gavazzi Automation S.p.A.
ICS08 IO-Link 3-wire DC
ICS08 IO-Link 3-wire DC DS EN11/05/2018
Fe360 : Steel
CrNi : Chrome-nickel
CuZn : Brass
Al : Aluminium
Cu : Copper
Sr : E󰀨ective operating distance
Fig. 3 The rated operating distance is reduced by
the use of metals and alloys other than Fe360. The
most important reduction factors for inductive prox-
imity sensors are shown in the gure.
Accuracy
Repeat accuracy (R) ≤ 5%
Features
Power Supply
Rated operational voltage (U
b
) 10 to 30 VDC (ripple included)
Ripple (U
rpp
) ≤ 10%
No load supply current (I
o
) ≤ 17 mA
Power ON delay (t
v
) ≤ 50 ms
Outputs
Standard sensors IO-Link sensors
Output functions NPN or PNP by sensor type
Congurable via IO-Link: PNP, NPN
or push-pull
Factory setting: PNP
Output conguration N.O. and N.C. by sensor type
Congurable via IO-Link: N.O. or N.C.
Factory setting: N.O.
Output current (I
e
) ≤ 100 mA
OFF-state current (I
r
)
(only for PNP or NPN output)
≤ 100 μA
Voltage drop (U
d
) Max. 1.2 VDC @ 100 mA
Protection Short-circuit, reverse polarity and transients
Voltage transient 1 kV/0.5 J