Datasheet

7
Carlo Gavazzi Automation S.p.A.
IBS04, ICS05 IO-Link 3-wire DC
IBS04, ICS05 IO-Link 3-wire DC DS EN10/07/2018
Features
Power Supply
Rated operational voltage (U
b
) 10 to 30 VDC (ripple included)
Ripple (U
rpp
) ≤ 10%
No load supply current (I
o
) ≤ 15 mA
Power ON delay (t
v
) ≤ 50 ms
Outputs
Standard sensors IO-Link sensors
Output functions NPN or PNP by sensor type
Congurable via IO-Link: PNP, NPN
or push-pull
Factory setting: PNP
Output conguration N.O. and N.C. by sensor type
Congurable via IO-Link: N.O. or N.C.
Factory setting: N.O.
Output current (I
e
) ≤ 100 mA
OFF-state current (I
r
)
(only for PNP or NPN output)
≤ 100 μA
Voltage drop (U
d
) Max. 1.2 VDC @ 100 mA
Protection Short-circuit, reverse polarity and transients
Voltage transient 1 kV/0.5 J
Response times
Operating frequency (f)
≤ 6 KHz Ø4, M5 standard range (S
n
: 0.8mm)
≤ 4.5 KHz Ø4, M5 extended range (S
n
: 1.3mm)
Indication
Standard IO mode:
Yellow LED Output Description
OFF OFF
N.O. output, target not present
N.C. output, target present
ON ON
N.O. output, target present
N.C. output, target not present
Blinking
f: 2Hz Short-circuit or overload
f: 1Hz Temperature alarm (if enabled)
IO-Link mode:
• LED is ON for 0.75 s and OFF for 0.075 s