User manual

© 2002 Carlo Gavazzi Industri A/S. All rights reserved 73
G 3800 X015 Configuration Software October 2002G 3800 X015 Configuration Software October 2002G 3800 X015 Configuration Software October 2002G 3800 X015 Configuration Software October 2002G 3800 X015 Configuration Software October 2002
Dial Out Phone-Numbers
Up to 4 telephone numbers where the SMS messages shall be sent to can be entered. The country code
must be included in the numbers (e.g. [phone]). It can be selected if an event-based SMS message
shall be sent out to all the telephone numbers on the list simultaneously, or if it shall be sent to the telephone
numbers one by one, until an acknowledge is received. The acknowledge is done by sending either a request
or just an empty SMS message to the Generator.
4.2 Event-based SMS messages
Parameter Description
Dial Out Phone
Numbers Up to 4 telephone numbers to which the SMS messages shall be sent can be
entered. The country code must be included in the numbers (e.g. [phone]).
It can be selected if an event-based SMS message shall be sent out to all the
telephone numbers on the list simultaneously, or if it shall be sent to the tele-
phone numbers one by one, until an acknowledgement is received. Acknowl-
edgement is performed by sending either a request or just an empty SMS mes-
sage to the Generator.
Max. User Response
time Only valid when "one by one to acknowledge" is selected. Here, the maximum
time the Generator shall wait for a response from a called number is entered.
Otherwise the next number will be called.
Acknowledge: Either a request, a command, or an empty SMS (password must
be included, if user password is selected).
Message Identifying
text Optional SMS identifier text, that will be included in the SMS messages sent by
the Generator.
Erase SMS on SImcard
during Power-Up Check this box to erase "old" unread SMS messages on the SimCard, during
System power-Up. This is to prevent out-dated messages from interfering.
Check Dial-in Numbers Check this box to activate the Dial-In number protection. Any received SMS-
message, contains the original phone-number. This number must exist in the
Dial-In numbers list, before any command is accepted by the Master Generator,
when this option is selected.
Allowed Dial-in Numbers Enter the phone numbers, which are allowed to send control and read com-
mands to the Generator. The country code must be included in the numbers
(e.g. [phone]).
Use Password Check this box to activate the Password-protection. Any received SMS-mes-
sage, will then be checked for the correct password, before any command is
accepted by the Mastergenerator.
Dial-in Password Type in a password with 4 characters, to be used in case "Use Password" is
selected.
Gross Automation [phone] · www.carlogavazzisales.com · [e-mail]