User manual

60 © 2002 Carlo Gavazzi Industri A/S. All rights reserved
G 3800 X015 Configuration Software October 2002G 3800 X015 Configuration Software October 2002G 3800 X015 Configuration Software October 2002G 3800 X015 Configuration Software October 2002
Object Function Channel
In-/outputs
Push button inputs Local activation A1..B4
C1..D4
Push button inputs Group-wise B5/6
Master D5/6
D7/8
Binary inputs for Priority control E1/E2
wind/rain sensors
Relay outputs Motors A1..B4
Configuration of Master Generator
Decentralized Roller blind/roof A1.. B4
Roller Blind Up-Down window control C1..D4
Roller Blind Master Group-wise con- B5/6
trol ground floor
Roller Blind Master Group-wise con- D5/6
trol 1st floor
Roller Blind Master Master control D7/8
Push button function Connection of E1/E2
Application Example
Task: Control of several roller blinds as well as a roof window in a building. The system should include
groupwise control for two different floors as well as master control of all roller blinds together.
To protect the roller blinds, a wind sensor and a rain sensor are installed. The roller blinds are to
roll down by rain and up by wind, and wind has priority. The roof window is to close by rain.
Solution: The roller blinds as well as the roof window are activated through Dupline roller blind control
modules. For the group-wise and the master control, roller blind master controls are used. The
address of the wind sensor is marked directly in the roller blind controls as priority address. The
down-channel of the master control is activated through logic setup via the address of the rain
sensor. Further details can be found in chapter 2.5.2.
With the logic setup below, the rain sensor activates all roller blinds in the Down-direction through the master
function. If the wind sensor channel is set, the command of the decentralized up-down control is not executed
(priority control at each decentral roller blind object).
Output Input 1 Function Input 2
D8 /E2 AND /E2
Gross Automation (877) 268-3700 · www.carlogavazzisales.com · sales@grossautomation.com