User manual

© 2002 Carlo Gavazzi Industri A/S. All rights reserved 57
G 3800 X015 Configuration Software October 2002G 3800 X015 Configuration Software October 2002G 3800 X015 Configuration Software October 2002G 3800 X015 Configuration Software October 2002
Connection of several motors
Simultaneous activation of several motors can be achieved by:
1. connecting all motors to separate outputs and
2. assigning the same address to all up-channels as well as all down-channels.
We strongly advise against connecting two or more motors in parallel to one output channel.
The flexible way of controlling several motors centrally or group-wise is to use the Roller blind master func-
tion. Further details are found in chapter 2.5.2.
Gross Automation [phone] · www.carlogavazzisales.com · [e-mail]