User manual

46 © 2002 Carlo Gavazzi Industri A/S. All rights reserved
G 3800 X015 Configuration Software October 2002G 3800 X015 Configuration Software October 2002
Parameter Description
Passive detector
Disable address Enter an address (A1..P8) or a flag (W1..Z8) whose activation (“1”-signal) will leave
out the Passive detector function of the monitoring system whereby it cannot
trigger off any further alarms.
Active detector
Disable address Enter an address (A1..P8) or a flag (W1..Z8) whose activation (“1”-signal) will leave
out the Active detector function of the monitoring system whereby it cannot trig-
ger off any further alarms.
Manual armouring
Door-lock armouring
Code lock armouring
Armouring delay Here you can determine the delay with which - after activation of the Manual
armouring function - the system becomes alert.
De-armouring delay With this setting you determine how many seconds are to elapse from an alarm
has occured till the alarm siren is to be activated. This also allows early acknow-
ledgement of the alarm or prevents an alarm output on the siren, for example in
order to make it possible to enter a building.
Parameters
Gross Automation [phone] · www.carlogavazzisales.com · [e-mail]