User manual

40 © 2002 Carlo Gavazzi Industri A/S. All rights reserved
G 3800 X015 Configuration Software October 2002G 3800 X015 Configuration Software October 2002
Parameters:
Parameter Description
Passive detector
Disable address Enter an address (A1..P8) or a flag (W1..Z8) whose activation (“1”-signal) will leave
out the Passive detector function of the monitoring system whereby it cannot trig-
ger off any further alarms.
Active detector
Disable address Enter an address (A1..P8) or a flag (W1..Z8) whose activation (“1”-signal) will leave
out the Active detector function of the monitoring system whereby it cannot trig-
ger off any further alarms.
Reset
Reset delay The delay after which the system becomes alert or an alarm is suppressed upon
activation of the reset button. This function can be used to ensure that the mea-
suring chambers are completely emptied of smoke.
This time is also used in connection with downloading of the software and switch-
ing on of the channel generator.
Gross Automation [phone] · www.carlogavazzisales.com · [e-mail]