User manual

36 © 2002 Carlo Gavazzi Industri A/S. All rights reserved
G 3800 X015 Configuration Software October 2002G 3800 X015 Configuration Software October 2002G 3800 X015 Configuration Software October 2002
On-delay Enter a time value in seconds (0..255) for which the alarm signal is delayed upon
activation of the alarm contact.
Acknowledge No configuration possibilities.
Reset No configuration possibilities.
Lamp test No configuration possibilities.
Alarm siren
Siren time This setting determines for how long the alarm output is to remain activated in
the case of alarm. The value can be between 0 and 60 min.
Note: With the Minus-key (-), the time can be set to an indefinite time. This is indi-
cated by “»»»“.
Time characteristics
Operation mode “Standard”
t
t
t
PMan_TISA_1a
t
2
t
1
t
4
t
3
t
t
Passive detector (IN)
Passive detector (OUT)
Acknowledgement
Reset
Alarm siren
T
EV
Gross Automation [phone] · www.carlogavazzisales.com · [e-mail]