User manual

18 © 2002 Carlo Gavazzi Industri A/S. All rights reserved
G 3800 X015 Configuration Software October 2002
Time characteristics
Timer with on- or off-delay
t
t
PMan_TTimer_1a
t
2
t
1
t
3
t
4
t
5
t
7
t
6
The on-delay t
E
starts shortly after the input signal at time t
1
. After elapse of the delay, the On-time t
N
starts.
After elapse of the On-time (t
3
), the output switches off again. To achieve this, the input must be reset before
time t
3
.
Parameter Description
Enabled by address Entering of an additional channel (A1..P8) or flag (W1..Z8) which will also enable
the timer function. To prevent locking, the channel assigned to the timer itself
must not be used.
If the additional signal is an impulse, select the option Activation by pulse.
Recycler
Configuration window for recycler
Parameter Description
Timer function To select the Recycler function, select “Recycler”
On-time Entering of the time (1 s to 99 h, 59 min, 69 s) for which the output is On during
recycling
Off-time Entering of the time (0 s to 99 h, 59 min, 59 s) for which the output is Off during
recycling
Enabled by address Entering of an additional channel or flag which will also enable the recycler. To pre-
vent locking, the channel assigned to the recycler itself must not be used.
IN
OUT
T
E
T
E
T
N
T
N
Gross Automation [phone] · www.carlogavazzisales.com · [e-mail]