User manual

© 2002 Carlo Gavazzi Industri A/S. All rights reserved 13
G 3800 X015 Configuration Software October 2002
2.2.2. The push-button function
Description
The push-button function - the most simple object of the Dupline Master Generator - makes it possible to
connect any type of push button switch and contact to the Dupline bus. With this function, outputs can indi-
rectly be controlled with logic functions.
In this function, the output follows the input signal: the output is activated as long as the input signal is ON
(inverted in Normally Closed function).
Parameters
Configuration window of push-button function:
Time characteristics
t
t
PManTTast_1a
t
3
t
2
t
1
t
t
PManTTast_2a
t
3
t
2
t
1
The output follows the input upon a short delay. In the Normally closed function, the output function is the
opposite of the input function.
Parameter Description
Inverted function When this function is selected, the output signal is inverted. This means that the
output is activated as long as the input has not been set.
• Function: Monostable
• Application: Connection of push-button switches and contacts for load
switching
• Also Normally Closed function
• Select with mouse (“Push button”) or short-cut key “0” (Zero)
Normally Open
Normally Closed
IN
IN
OUT
OUT
Gross Automation [phone] · www.carlogavazzisales.com · [e-mail]