Instruction manual

46
WM5-96 Instruction Manual
Technical specifications
Analysis principle FFT
Harmonic measurement
Current Up to the 63
rd
harmonic
Voltage Up to the 63
r
d
harmonic
Type of harmonics THD (VL1 and VL1-N)
THD odd (V
L1 and VL1-N)
THD even (V
L1
and V
L1-N)
The same for the other phases:
L2, L3.
THD (A
L1)
THD odd (A
L1)
THD even (A
L1)
The same for the other phases:
L2, L3.
Harmonic phase angle The instrument measur
es the
angle between the single har-
monic of “V” and the single
harmonic of “I” of the same
or
der
. Accor
ding to the value
of the electrical angle, it is
possible to know if the distor-
tion is absorbed or generated.
Note: if the system has 3
wires the angle cannot be
measured.
Harmonic details The harmonic contents is dis-
played as a graph showing
the whole harmonic spec-
trum. This value is also given
as a numerical information:
THD % / RMS value
THD even % / RMS value
THD odd% / RMS value
single harmonics in % /
RMS value
System The harmonic distortion
can be measured in single-
phase, 3-wire or 4-wire
systems.
Tw: 0.02 sec@50Hz with-
out filter
Harmonic distortion analysis
M
eters
T
otal 4 (9-digit)
P
artial and multitariff 48 (9-digit)
Tariffs Up to 12
T
ime periods
N
umber of periods Up to 24 per day
Up to 100 different days per
year
P
ulse output
C
onnectable to total and/or
p
artial meters (multitariff)
Energy meter recording Consumption history by
recording of the monthly
energy meters (12 previous
months). Recording of
total and partial energy
meters.
Energy meter recording
(EEPROM)
Max.999.999.999kWh/kvarh.
Time period management
Energy Meters
Total energy meters 4 (+kWh, +kvarh, -kWh, -kvarh)
It is possible to divide each
e
nergy meter here above listed
i
n 3 additional energy meters
(
1 for each phase “L1-L2-L3”)
Monthly energy meters 48 (energy meters for
each month: “+kWh, +kvarh,
-kWh, -kvarh”)
Partial energy meters 16 (using digital inputs:
max 4 tariffs).
48 (using the internal clock:
m
ax 12 tariffs)