Instruction Manual

SUPPLIER’S DECLARATION OF CONFORMITY:
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon.
We,
Carlo Gavazzi controls Spa
Via Saorze 8, Belluno
IT-32100 ITALY
www.gavazziautomaon.com
hereby declare that the equipment bearing the model name specied below was tested conforming to the applicable FCC Rules and Regulaons Title 47 Part 15 under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in
force to assure that producon units of the same equipment will connue to comply with the Commissions requirements.
Unique Idener:
Type of product: Wireless endpoint gateway
Brand name: Carlo Gavazzi
Model name: UWPAM1US1L2X
FCC ID: SNJWLA
IC: 7118D-WLA
Responsible Party – U.S. Contact Informaon Company:
Carlo Gavazzi Inc.
750 Hasngs Lane,
Bualo Grove, IL 60089, USA
Tel: [phone]
Fax: [phone]
[e-mail]
FCC COMPLIANCE STATEMENT:
Changes or modicaons not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operaon.
This radio transmier has been approved by the FCC to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for
use with this device.
Interface and frequency range Type Max Gain
LoRa (902-928 MHz) Dipole Antenna +2.15 dB
This device complies with the FCC RF exposure limits and has been evaluated in compliance with mobile exposure condions.
The equipment must be installed and operated with minimum distance of 20 cm of the human body.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does
cause harmful interference to radio or television recepon, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
2020-11-02 | 8021879 | COPYRIGHT ©2020
CONFORMITY
Name:UWPMM1UL2X
FCC ID:SNJWLM
IC: 7118D-WLM
LoRa (902.3 - 911.9 MHz)
LoRa (903.0 - 912.6 MHz)