User guide

Carlin part number MNEZ123 Rev. 07/13/11
– 28 –
Model EZ-1/2/3 oil burners — Instruction manual
For other than routine maintenance, contact
a qualified service company. Perform the
following as needed.
• Keepthe area around the burner clear
and free from combustible vapors and
liquids.
• Do not obstruct the ow of combustion
and ventilating air.
• Mostmotorscurrentlyusedonresidential
type burners use permanently-lubricated
bearings, and do not require field lubri-
cation. Read the label on the motor to
determine oiling needs, if any. Do not
over-lubricate. This can cause as much
trouble as not lubricating at all.
Never attempt to use gasoline as
a fuel for this burner, as it is more
combustible and could result in a
serious explosion. Never attempt to
burn refuse or use any fuel other
than#1or#2heatingoil(ASTM
D396).
EZ-1/2/3 oil burner
User care and maintenance
 Referonlytotheinformationonthis
page, intended for your use. The
remainder of this manual is intended
only for your service technician.
Failure to comply could result in
severe personal injury, death or
substantial property damage.
Should overheating occur:
 (1)shutofftheoilsupplytotheburner.
 (2)DONOT shut off the control switch to the
circulator or blower.
 (3)contactyouroildealerorservicetechni-
cianandtheredepartment(ifneeded).
The burner must be cleaned, tested and
adjusted annually by a qualied oil burner
service technician.