User guide

Carlin part number MNEZ123 Rev. 07/13/11
– 24 –
Model EZ-1/2/3 oil burners — Instruction manual
7. Repair parts
Item Description Part No. Item Description Part No.
1
Air tube, 4” nominal, approx. 4-3/8”oal (EZ -1), universal flange 77719
13
Head positioning bar kit w/7 bars & thumb screw (EZ -1, EZ-1-HP) 98078
Air tube, 5” nominal, approx. 5-3/8” oal (EZ -1), universal flange 77727 Head positioning bar kit w/4 bars & thumb screw (EZ -2, EZ-2-HP) 84715
Air tube, 7” nominal, approx. 7-3/8” oal (EZ -1), universal flange 77735 Head positioning bar kit w/3 bars & thumb screw (EZ -3, EZ-3-HP) 86389
Air tube, 9” nominal, approx. 9-3/8” oal (EZ -1), universal flange 77743
14
Combustion head assembly 4” 77941
Air tube, 11” nominal, approx. 11-3/8” oal (EZ -1), universal flange 77750 Combustion head assembly 5” 77958
Air tube, 5” nominal, approx. 5-1/4” oal (EZ -2 & 3), universal flange 83816 Combustion head assembly 7” 77966
Air tube, 7” nominal, approx. 7-1/4” oal (EZ -2 & 3), universal flange 83824 Combustion head assembly 9” 77974
Air tube, 9” nominal, approx. 9-1/4” oal (EZ -2 & 3), universal flange 83832 Combustion head assembly 11” 77982
Air tube, 11” nominal, approx. 11-1/4” oal (EZ -2 & 3), universal flange 83840
15
Electrode bracket 23135
Air tube with welded flange, for specific appliance (contact factory) —
16
Bracket, nozzle line heater 64493
2
Motor, 1/6 hp, 3450 rpm, Carlin PSC 98022
17
Nozzle line heater w/electrical disconnect 66787
Motor, 1/7 hp, 3450 rpm, for Suntec A/B, Webster M/2M, and Danfoss
pumps
27490
18
C-ring for nozzle line 31633
Motor, 1/6 hp, 3450 rpm, for Suntec J/H pumps 27631
19
Thumb nut, nozzle line 62885
3
Electrode wire, set of 2, 4” nominal, approx. 5-1/2” oal (EZ -1 only) 82750
20
Gasket, transformer 40167
Electrode wire, set of 2, 5” nominal, approx. 6-1/2” oal 82768
21
Cad cell 4002400A
Electrode wire, set of 2, 7” nominal, approx. 8-1/2” oal 82776
22
Transformer terminal kit, (2 terminals & nuts) 24463
Electrode wire, set of 2, 9” nominal, approx. 10-1/2” oal 82784
23
Transformer hold-down tab, two required 44842
Electrode wire, set of 2, 11” nominal, approx. 12-1/2” oal 82792
24
Junction box, 4”x4”, w/grommet and lockwasher 44586
4
Nozzle line/adaptor assembly, 4” nominal, approx. 5-3/4” oal (EZ -1 only) 56804
25
Blower wheel, 5-1/16d x 2w 77933
Nozzle line/adaptor assembly, 5” nominal, approx. 6-3/4” oal 56820
26
Primary control (consult factory for other controls) 60200
Nozzle line/adaptor assembly, 7” nominal, approx. 8-3/4” oal 56861
27
Welded flange, when supplied (contact factory) —
Nozzle line/adaptor assembly, 9” nominal, approx. 10-314” oal 57315
27a
Mounting flange, 3-1/2 id x 8-1/4 od Universal flange 81364
Nozzle line/adaptor assembly, 11” nominal, approx. 12-3/4” oal 56754
28
Gasket, mounting flange 40287
5
Ignitor, Carlin electronic 41000
29
Pedestal w/hardware 23317
6
Oil valve, instant opening 40857
30
Screw, head positioning bar 98349
Oil valve kit, instant opening, w/fittings & oil lines 24638
31
Flame retention ring assembly 77438
Oil valve, instant opening, Carlin SVC10FF
32
Nozzle (obtain locally) —
Oil valve kit with fitting, Carlin 98289
33
Housing, w/84939 access cover 7781801
7
Fuel unit, std. single stage, Suntec A2VA-7116, w/fitting 22996
34
Plug-in wire harness, when supplied (contact factory) —
Fuel unit, std. two stage, Suntec B2VA-8216, w/fitting 23002
35
Elbow, 3/16 flare x 1/8 NPT 29926
Fuel unit, std. single stage, Webster M34D, w/fitting 23143
Fuel unit, std. two stage, Webster 2M34D, w/fitting 23176
Fuel unit, std. single stage. Danfoss BFPH w/fitting (ez-1) 27183
Fuel unit, opt. single stage, Suntec JA2BB-300, w/fitting (Note 1) 23127
Fuel unit, opt. two stage, Suntec HA2BB-300, w/fitting 23069
8
Oil line, 3/16 od, std. fuel unit to oil valve 34397
Oil line, 3/16 od, opt. fuel unit (J/H pump) to oil valve 34413
8a
Oil line, 3/16 od, oil valve to nozzle line 34439
9
Oil line, 3/16 od, std. fuel unit to nozzle line 34470
Oil line, 3/16 od, opt. fuel unit (J/H pump) to nozzle line 34512
10
Coupling, for std. fuel units, approx. 2-3/8” oal 75564
Coupling, for opt. fuel units (J/H pumps), approx. 2-3/16” oal 28704
11
Air band (EZ-1), with 100 PSIG scale 98055
Air band (EZ -2), with 100 PSIG scale 98087
Air band (EZ -3), with 100 PSIG scale 98089
12
Air shutter, blank (EZ-1) 97780
Air shutter, one slot (EZ -1) 98052
Air shutter, three slots (EZ -2) 98109
Air shutter, four slots (EZ -3) 98108
For parts not shown or listed, contact factory and/or check separate documentation supplied with appliance/burner unit.
Note 1: Requires 1/6 hp motor (item 2) and special coupling