Owner manual

Model 601GAS burner — Instruction manual — Supplement – Massachusetts Code
Carlin part number MN601GASM Rev. 05/01/07
– 8 –
Where appliance instructions differ from this manual, follow the appliance instructions.
Item
number
Description Part
number
NOTICE: 1” NPT gas train is used up to 1100 Btuh Natural gas, 1500 Btuh Propane; 1¼” NPT is used for higher inputs.
1 Pipe plug, 1/4” NPT (3 required) Obtain locally
2 Gas cock: 1” NPT . . . . . . . . . . . . . . . . . . . . . .
1¼” NPT . . . . . . . . . . . . . . . . . . . . .
99225
99245
3 Pipe nipple, schedule 40 steel 1” NPT x 2” long . . . . . . . . . . . . . .
1¼” NPT x 2” long. . . . . . . . . . . . .
Obtain locally
4 Low gas pressure switch 99234
5 Pipe nipple, schedule 40 steel 1/4” NPT x 2” long . . . . . . . . . . . . . Obtain locally
6 Pipe nipple, schedule 40 steel with 4 x 4 junction box 1” NPT x 7” long . . . . . . . . . . . . . .
1¼” NPT x 7” long . . . . . . . . . . . . .
99517
99443
7 Primary gas valve, Honeywell (must be mounted horizontally, as shown)
Natural gas: V4944N-1011, 1” NPT . . . . . . . . . . .
V4944N-1029, 1¼” NPT . . . . . . . . .
Propane gas: V4944L-1016, 1” NPT . . . . . . . . . . .
V4944L-1024, 1¼” NPT . . . . . . . . . .
99796A
99796B
99796C
99796D
8 Pipe nipple, schedule 40 steel 1” NPT x 4” long . . . . . . . . . . . . . .
1¼” NPT x 4” long . . . . . . . . . . . . .
Obtain locally
9 Pipe nipple, schedule 40 steel 1” NPT x 2” long . . . . . . . . . . . . . .
1¼” NPT x 2” long . . . . . . . . . . . . .
Obtain locally
10 Gas pressure regulator, Maxitrol RV-61, 1” NPT. . . . . . . . . . . . . . . . .
RV-81, 1¼” NPT . . . . . . . . . . . . . . .
Vent limiting orifice. . . . . . . . . . . .
99233
99432
Apply local
codes
11 Pipe nipple, schedule 40 steel, with 1/4” NPT tapping 1” NPT x 6” long . . . . . . . . . . . . . .
1¼” NPT x 6” long. . . . . . . . . . . . .
99239
99442
12 Secondary gas valve, Honeywell V4295A 1” NPT . . . . . . . . . . . . . . . . . . . . . .
1¼” NPT . . . . . . . . . . . . . . . . . . . . .
99229
99435
13 Union, black iron 1” NPT . . . . . . . . . . . . . . . . . . . . . .
1¼” NPT . . . . . . . . . . . . . . . . . . . . .
Obtain locally
14 Orifice nipple w/ orifice plug (with starter orifice 9/32” drill) 1” NPT schedule 40 steel x 2”
1¼” NPT x 2” long
9925020
9947620
15 Pipe elbow, 90° black iron 1” NPT . . . . . . . . . . . . . . . . . . . . . .
1¼” NPT . . . . . . . . . . . . . . . . . . . . .
Obtain locally
16 Pipe nipple, schedule 40 steel 1” NPT x 3” long . . . . . . . . . . . . . .
1¼” NPT x 3” long . . . . . . . . . . . .
Obtain locally
17 High gas pressure switch 99235
18 Pipe elbow, 90° black iron 1” NPT . . . . . . . . . . . . . . . . . . . . . .
1¼” NPT . . . . . . . . . . . . . . . . . . . . . .
Obtain locally
19 Pipe nipple, schedule 40 steel 1” NPT x 2” long . . . . . . . . . . . . . .
1¼” NPT x 2” long . . . . . . . . . . . . .
Obtain locally
20 Pipe nipple, schedule 40 steel 1” NPT x 4” long . . . . . . . . . . . . . .
1¼” NPT x 4” long . . . . . . . . . . . .
Obtain locally
Not shown
Time-delay relay, 8-second (mounted to gas train junction box) 99797
Replace Instruction manual content:
This page replaces Instruction manual page 26.
9. Replacement parts – Gas train (Massachusetts Code burners)