Technical data

Vario II series
Maintenance and cleaning
06/10
Operating manual
93
10.5 Replacing the printhead (general)
The printhead (4) is preinstalled on a head plate (1) and
precisely aligned at the factory.
Figure 14
1
Head plate
2
Plug connection signal
3
Plug connection tension
4
Printhead
5
Focal line
CAUTION!
The printhead can be damaged by static electricity
discharges and impacts!
⇒ Set up printer on a grounded, conductive surface.
⇒ Ground your body, e.g. by wearing a grounded
wristband.
⇒ Do not touch contacts on the plug connections (2, 3).
⇒ Do not touch printing line (5) with hard objects or
your hands.