Technical data

Function menu
Vario II series
72
Operating manual
06/10
8.16 Emulation
Press key to access the function menu.
Press key
as long as you arrive at the 'Emulation' menu.
Press key
to select the menu.
Protocol:
CVPL: Carl Valentin Programming Language
ZPL: Zebra
®
Programming Language
Change between CVPL protocol and ZPL II
®
protocol.
Press key
to confirm the selection.
The printer performs a restart and ZPL II
®
commands are transformed
into CVPL commands internally by the printer and then executed by
the printer.
Press key
in menu protocol to arrive at the next menu item.
Printhead resolution:
At activated ZPL II
®
emulation the printhead resolution of the emulated
printer must be set, e.g. 11.8 Dot/mm (= 300 dpi).
If the printhead resolution of the Zebra
®
printer differs from
that of the Valentin printer, then the size of objects (e.g. texts,
graphics) complies not exactly.
Press key to arrive at the next menu item.
Drive mapping:
The access to Zebra
®
drives
B: Memory Card
R: RAM Disk (standard drive, if not indicated)
is rerouted to the corresponding Valentin drives
A: Memory Card (slot 1) and/or Compact Flash
B: Memory Card (slot 2)
R: RAM Disk
This can be necessary if the available space on the RAM disk (at
present. 512 KByte) is not sufficient or if bitmap fonts are downloaded
to the printer and be stored permanently.
As the printer build-in fonts in Zebra
®
printers are not available
in Valentin printers, this can cause small differences in the
text image.