Technical data

Vario II series
Function menu
06/10
Operating manual
65
8.8 Parallele interface
Press key to access the function menu.
Press key
as long as you arrive at the 'Parallel Interface' menu.
Press key
to select the menu.
Parallel port:
SPP - Standard Parallel Port
ECP - Extended Capabilities Port (grants a fast data transmission but
it is only to set at PCs of newer version).
Please observe that the settings correspond to those of the PC.
8.9 Start/stop sign
Press key to access the function menu.
Press key
as long as you arrive at the 'Start/Stop Sign' menu.
Press key
to select the menu.
SOH: Start of data transfer block
Hex format 01
ETB: End of data transfer block
Hex formal 17
Two different start / en signs can be set. The settings are normally
SOH = 01 HEX and ETB = 17 HEX. Several host computers cannot
process these signs and therefore SOH = 5E HEX and ETB = 5F
cannot be set.
8.10 Paper counter
Press key to access the function menu.
Press key
as long as you arrive at the 'Paper Counter' menu.
Press key
to select the menu.
Paper counter:
D: Indication of printhead attainment in meters.
G: Indication of printer attainment in meters.