Technical data

Function menu
Vario II series
62
Operating manual
06/10
Press key
to arrive at the next menu item.
Cutter:
The cutter menu is only displayed if the printer recognises the
option by the cutter photocell when switching on the printer.
The first line indicates the selected cutter operating mode. In the
second line it is possible by means of key
to select the desired
control mode.
In case you select automatic, then a cut is released after each printed
label. If you select external, then the cut is released by an external
I/O. Please note that you can select external in case your printer is
equipped with option external I/O.
Press key
to change to the next operating mode (see chapter
9.1Cutter, on page 75).
Press key
to arrive at the next menu item.
Photocell:
Selection of the used photocell.
The following photocell types can be selected: Transmission photocell
normal and inverse, reflexion photocell normal and inverse (see
chapter 12.5 Photocells, on page 114).
Scan position (SP):
Entry of percental label length by that the label end is searched.
Marks onto the label can be skipped.
Press key
to arrive at the next menu item.
Label error length:
In case an error occurs, indication after how many mm a message
appears in the display.
Value range: 1 mm to 999 mm.
Synchronisation:
On: If a label is missed on the liner an error message is displayed.
Off: Missing labels are ignored, i.e. it is printed into the gap.
Press key
to arrive at the next menu item.
Printer language:
Selection of language in which you want to display the text in the
printer display.
At the moment the following languages are available: German,
English, French, Spanish, Portuguese, Dutch, Italian, Danish, Finnish
or Polish.
Press key
to arrive at the next menu item.
Field handling:
Off: The complete print memory is deleted.
Keep graphic: A graphic res. a TrueType font is transferred to the
printer once and stored in the printer internal memory. For the
following print order only the modified data is transferred to the printer.
The advantage is the saving of transmitting time for the graphic data.
The graphic data created by the printer itself (internal fonts, bar codes,
...) is generated only if they were changed. The generating time is
saved.
Delete graphic: The graphics res. TrueType fonts stored in the
printer-internal memory is deleted but the other fields are kept.