Technical data

Function menu
Vario II series
60
Operating manual
06/10
Press key
to arrive at the next menu item.
Y displacement:
Indication of initial point displacement in mm. The label is moved
vertically.
Value range: −30.0 to +90.0.
Press key
to arrive at the next menu item.
X displacement:
Indication of displacement in X direction. The fields on the label are
moved.
Value range: −90.0 to +90.0.
Press key
to arrive at the next menu item.
Tear off:
Indication of value to which the last label of a print order is moved
forward and is moved back to the label start at a new print start.
Labels can be torn after termination of the print order without a loss of
labels by tearing.
Default: 12 mm.
Value range: 0 to 50.0 mm.
Press key
to arrive at the next menu item.
Column printing:
NC: Indication of number of columns that are placed side by side on
the backing paper.
CW: Indication of column width (see chapter 12.1 Column printing, on
page 107).
Press key
to arrive at the next menu item.
External parameters:
On: Sending parameters such as print speed and contrast via our
label creation software to the printer. Parameters which are set
directly at the printer before are no longer considered.
Off: Only settings made directly at the printer are considered.
Press key
to arrive at the next menu item.
Measure label automatically:
On: After switching on the printer, the loaded label is automatically
measured.
Off: In order to start the measurement procedure you have to change
to the corresponding menu.