Technical data

Vario II series
Label creation
06/10
Operating manual
51
7.5 Rectangle
Press key
and the display indicates the following text mask:
Press key
E as long as cursor reached A, then enter 10 for rectangle.
Press key
E again and the display indicates the following for the entry
of mask.
Press key
E to access the next field.
Selected values are only accepted if the entry was confirmed with key
.
Press key
and to increase and/or decrease the number of mask
record (number of lines).
Y - Distance from top in mm
It is measured from upper label margin to lower left point of the
rectangle.
H - Height of rectangle
Indication of height in mm.
T - Selection of line type
10 = Rectangle
X - Distance from right side in mm
It is measured from right label margin to lower left point of the
rectangle.
W - Width of rectangle
Indication of rectangle in mm.
F - Line thickness
Value of F x [0,125]
*
0,083 mm
*
Indications in [ ] correspond to printers with 200 dpi
Mask entry