Technical data

Vario II series
Error correction
06/10
Operating manual
105
No original printhead is used.
Check the used printhead.
Contact your distributor.
Wrong Tag type.
Tad data do not match the Tag
type in the printer.
Adapt data or use the correct
Tag type.
RFID module is not activated.
No RFID data can be processed.
Activate RFID module or remove
RFID data from label data.
Transferred GS1-128 (EAN 128)
bar code is invalid.
Verify bar code data (see GS1-
128 bar code specification).
Error at EPC calculation. Verify data (see EPC
specification).
When starting the print order the
housing cover is not closed.
Close the housing cover and
start the print order anew.
Transferred EAN.UCC code is
invalid.
Verify bar code data (see
corresponding specification).
Printing carriage does not move.
Check gear belt (possibly
broken).
Applicator error.
Check applicator.
Applicator
Left end position
Check LEFT final position switch
for correct function and position.
Check function of pneumatics for
cross traverse.
Applicator:
Right end position
Check RIGHT final position
switch for correct function and
position.
Check function of pneumatics for
cross traverse.
Applicator:
Not in print position
Check TOP and RIGHT final
position switch for correct
function and position.
Check function of pneumatics.
Parameter error XML file.
Please contact your responsible
distributor.