Technical data

Vario II series
Error correction
06/10
Operating manual
101
The selected file/directory
already exists.
Check name, select a different
name.
During copying procedure not
enough memory space onto
target drive available.
Use a larger target card.
Errors in update file of firmware.
Start update file anew.
The selected file does not
contain graphic data.
Check file name.
Attempt to delete a not empty
directory.
Delete all files and sub-
directories in the desired
directory.
No memory card drive found.
Check connection of memory
card drive.
Contact your distributor
No memory card is inserted.
Insert memory card in the slot.
Error at start of web server.
Please contact your distributor.
The printer is equipped with the
wrong FPGA.
Please contact your distributor.
The label length is too long.
The number of labels per cycle
is too much.
Check label length res. the
number of labels per cycle.
Defective photocell.
Change photocell.
Pressure air is not connected.
Check pressure air.
External print release signal is
missing.
Check input signal.
Wrong definition of column width
res. number of columns.
Reduce the column width res.
correct the number of columns.