User's Guide

IOT Gateway User Guide

11. Procedure to Insert LTE SIM card

Please note: This procedure is only for IOTGateway with USB adapter and LTE module installed.

The SIM card installation procedure is outlined below.

1. Start with the IOTGateway closed and face down.

2. Slowly slide the electronics assembly from the case being careful to prevent antenna

cables being entangled. The SIM card connector is positioned to the underside of the LTE

adapter board. Situate the SIM card as shown.

3. Push the SIM card into the connector using a suitable plastic tool.

4. Slide the electronics assembly back into the case being careful to prevent damage to

internal components or antenna cables.

5. The SIM Card assembly process is now complete.