User`s guide

Overview

2010-11-04 2G8647 1-3

How the Laser Imager Works

When the Laser Imager receives a print request, it determines the

requested film size and type then selects the appropriate film cartridge.

Each time the Imager receives a print request, the following print

sequence occurs.

Print Sequence

1. Suction cups in the pickup area lift a single sheet of film out of the supply

cartridge and feed the film into the transport rollers.

2. The transport rollers move the film down into the registration transport

area, where film registration takes place.

7 Local panel. The local panel contains the power button used to turn

power ON/OFF for the Imager during normal operations. It also

contains the touch screen.

8 Touch screen. The touch screen is your interface to the Laser

Imager. The screen accepts your commands and gives you status

information about Imager functions.