User`s guide

1-2 2G8647 2010-11-04

Overview

System Components

1 Film drawers. Your Imager may be configured for one, two, or three

film drawers. Each film drawer can hold any of five different sizes of

DRYVIEW Laser Imaging Film. You can select the film cartridge in any

drawer for printing.

2 Film registration. The film registration orients and centers the film

while moving the film from the film drawers to the imaging portion of

the Imager.

3 Film imaging. The optics module writes the image onto the film

while the film is moved through the exposure transport.

4 Film processor. The film processor uses heat to develop the image

written onto the film by the laser in the optics module.

5 Densitometer. The densitometer receives the film after it passes

through the processor and performs a density check to confirm image

quality when a calibration is run.

6 Film sorter. Your Imager may be configured without a sorter. The

film sorter receives the processed film and transports the film to the

selected film bin on top of the Laser Imager. Each of the five bins

holds 50 sheets of film.