User manual

9
ENG
“UEX-PLUS” +03U220621 - rel. 1.4 - 04.08.2009
installeruserservice
turn the red oval-shaped plate with the CAREL logo until covering the 4.
fastening holes.
Models UE025 to UE130
1
2
4
3
5
1
3
2
4
1
3
4
2
1
2
Fig. 1.l
slip the cover/covers onto the frame (keeping it/them slightly raised 1.
and tilted), until it rests on the rear edges;
tighten the screws on the top of the humidi er using a screwdriver.2.
Important: in models UE025 to UE130 open the electrical
compartment on the humidi er using the lock with slot.
Fig. 1.m
1.8 Components and accessories
Once having opened the packaging and removed the front cover of the
humidi er, make sure the following are included:
kit of screws with plugs for o
wall-mounting;
kit code o
UEKTERM000 of
connectors for the electronic
board
models UE025 to UE130 only: o
angular plastic hose (drain
water connection).
models UE001 to UE018 o
use  ll hose connection
FWH3415000 , and models
UE025 to UE130 use code
FWHDCV0000 non-return
valve with connection pipe
for  ll water and use code
FWH3415000 for inlet drain
temperening.
UEKFILT000 for the gasket /  ll o
valve kit that is supplied with
models UE001 to UE018.