User manual

8
ENG
“UEX-PLUS” +03U220621 - rel. 1.4 - 04.08.2009
installeruserservice
Spacing of the holes on the wall
Models UE001 to UE065
bracket
X
Fig. 1.e
Spacing of the holes on the wall
Models UE001 to UE018
distance
mm (in)
Models
UE001 to
UE008
UE009 to
UE018
X 270 (10.7) 270 (10.7)
Y 496 (19.5) 591 (23.3)
Z 107 (4.2) 107 (4.2)
Z’ 163 (6.4) 163 (6.4)
Fig. 1.f
Models UE025 to UE065
distance
mm (in)
UE025 to
UE045
UE045* to
UE065
X 310 (12.2) 400 (15.7)
Y 655 (25.8) 730 (28.7)
Z 127.5 (5.0) 122.5 (4.8)
Z’ 172.5 (6.8) 167.5 (6.6)
* 230 Vac models only
Fig. 1.g
Models UE090 to UE0130
Fig. 1.h
distance mm (in) Models UE090 to UE130
X 150 (5.9)
Y 740 (29.1)
Z 850 (33.5)
1.6 Removing the front cover
Models UE001 to UE018
1
2
4
3
5
1
3
2
4
1
3
4
2
1
2
Fig. 1.i
turn oval-shaped label with the Carel logo, revealing the head of the
1.
grounding screw below;
remove the screw using a screwdriver;2.
hold the cover by the sides and lift it around 20 mm (0.79”), releasing it 3.
from the protruding edges of the humidi er;
remove the cover by moving it forwards;4.
remove the protective  lm 5.
Models UE025 to UE130
1
2
4
3
5
1
3
2
4
1
3
4
2
1
2
Fig. 1.j
remove the screws from the top of the humidi er using a screwdriver;
1.
hold the cover/covers from the top and lift it around 20 mm (0.79”);2.
remove the cover/covers by moving it/them forwards;3.
remove the protective  lm (on all the outside surfaces of the 4.
humidi er).
1.7 Fitting the front cover
Models UE001 to UE018
1
2
4
3
5
1
3
2
4
1
3
4
2
1
2
Fig. 1.k
turn the red oval-shaped plate with the CAREL logo, revealing the
1.
fastening hole below;
slip the cover onto the frame (keeping it slightly raised and tilted), until 2.
it rests on the rear edges;
tighten the earth screw using a screwdriver;
3.
X
Y
ZZ’
==
=
X
Y
X
Y
Z
= =
= =
=
XX
Y
XX
X
XX
= =
= =
=
X
Y
X
Y
Z
= =
= =
=
XX
Y
XX
X
XX
= =
= =