User manual

20
GB
“Wellness” +030220571 - rel. 3.0 - 01.10.2007
installeruserservice
6.4 Management menu
1 User Clock
Scheduler
Schedule
(*)
Week sch.
(*)
T. setpoint
(*)
Enable descriptions (i)
2 Essences Essence 1
(*)
Essence 2
(*)
Essence 3
(*)
3 Fans Supply fan (*)
Exhaust fan (*)
4 Maintenance 1 Maint info SW outputs (**)
Nom. values (**)
Cylinder status (**)
Sys info (**)
2 Maint SW Additional features
Additional features
Disable emptying
Conductivity threshold
Control parameters
SW Input/output
Backup
Recovery
3 Maint HW Setup
Essences
Essences
Fans
Temperature probe 1
Temperature probe 2
Other options
Man. procedure
Manual proc.
Manual procedure
5 Sanitisation San.
(*)
San. Phase 1
(*)
San. Phase 2
(*)
6 Alarm log Log (**)
7 Network Supervision
8 GSM (*) SMS 1
(*)
SMS 2
(*) (**)
Tab. 6.b
(*)
screens available if the functions (user, essences, fans, maintenance,
sanitisation, network, GSM) have been enabled. For example: the
screens in the “fans” submenu are only visible if enabled in the “Maint
HW” submenu;
(**) read-only values.
Function of the keypad in the management menu
button function
alarm access the alarm screen, displaying any alarms in
progress (the button  ashes)(*)
PRG from the “Main” screen: access the management
menu
ESC return to the previous screen
(**)
UP e DOWN in the “management menu”: navigate the
submenus, screens, parameters cyclically (also in
the opposite direction)
inside a screen: modify the values of the
parameters (YES/NO, ON/OFF, temperature
range,…)
•
•
ENTER select a submenu, screen, parameter
save the changes to the parameters and move the
cursor to the next parameter
•
•
(*)
To reset an alarm in progress, press the ALARM button again.
(**)
Important: before pressing the ESC button, press the ENTER button to save
the last change made.
Installer’s notes
Names chosen for the essences
Essence 1: ………………………………….
Essence 2: ………………………………….
Essence 3: ………………………………….