User manual

9
ENG
“UE BASIC” +030220630 - rel. 2.2 - 07.11.2008
1.7 Fitting the front cover
Models UE001 to UE018:
1
3
4
2
Fig. 1.g
turn the red oval-shaped plate with the CAREL logo, revealing the
1.
fastening hole below;
slip the cover onto the frame (keeping it slightly raised and tilted), 2.
until it rests on the rear edges;
tighten the earth screw using a screwdriver;3.
turn the red oval-shaped plate with the CAREL logo until covering 4.
the fastening hole below7.
Models UE025 to UE065:
1
2
Fig. 1.h
slip the cover/covers onto the frame (keeping it/them slightly raised
1.
and tilted), until it rests on the rear edges;
tighten the screws on the top of the humidi er using a screwdriver.
2.
Important
Important: in models UE025 to UE065 open the electrical
compartment on the humidi er using the lock with slot.
Fig. 1.i
1.8 Components and accessories
Once having opened the packaging and removed the front cover of the
humidi er, make sure the following are included::
kit of screws with plugs for □
wall-mounting
kit code □ 98C615P003
of connectors for the
electronic board
models UE025 to UE065 □
only: code FWHDCV0000
non-return valve with
connection pipe
models UE025 to UE065 □
only: angular plastic hose
(drain water connection)..