Specifications



Note: Please remove the battery if the meter is likely to be unused for

some time.

Sensor Expiry

Sensor life ranges from 2 to 5 years and depends upon both the

amount of exposure to CO and other gases, particularly solvents

such as alcohol and cleaning fluids.

When the sensor has expired it will become impossible to obtain a

correct calibration. When this occurs, the Smoke Check must be

returned to CareFusion, or an authorised agent, for sensor

replacement.

Cleaning

The mouthpiece adapter may be cleaned using a mild detergent

solution or replaced if there is risk of contamination. Exposed surfaces

of the meter, other than the sensor surface, may be wiped with a

clean, damp cloth. It is recommended that this procedure is

performed after each use and all used cardboard mouthpieces

discarded.

Important note: The sensor surface must not be wiped with any

aqueous solutions and must not be exposed to solvents e.g. alcohol or

permanent damage may result.

Servicing

A full service manual including circuit diagram and parts list is

available upon request.

For US Customer Care: Toll Free 1-800-231-2466, phone 1-714-

283-2228