Instruction manual

Instruction Manual MicroBlender
L2965–101 Rev. D 9
Section 4: Controls and Alarms
The MicroBlender delivers selected oxygen concentrations through two outlet
ports. The outlet ports, although similar in appearance, have different flow
range specifications. The two outlet ports provide a choice of flow ranges
based on the application desired. Both outlets may be used simultaneously,
provided the combined flows do not exceed the rated maximum flow capability
of the MicroBlender. The use of a flow meter attached to either or both of the
outlet ports may be used to control the flow of mixed gas.
Low Flow MicroBlender High Flow MicroBlender
(Front View)
An audible alarm indicates a differential of 20 PSI has been reached between
air and oxygen inlet gas pressures.
Control knob—allows
selection of oxygen
concentrations from
21 to 100%