Service manual

Service Manual 9
675-120 Revision D May 2005
With regards to Electrical Safety:
Class 1 equipment
Contains type BF patient applied parts
Continuous Operation
MRI Notice
This equipment contains electromagnetic components whose operation can be
affected by intense electromagnetic fields.
Do not operate this device in a MRI environment or in the vicinity of high-frequency
surgical diathermy equipment, defibrillators, or short-wave therapy equipment.
Electromagnetic interference could disrupt the operation of the device.
Intended Use Notice
The Infant Flow
®
SiPAP, consisting of a Driver and Generator plus NCPAP Prongs
and Masks, is a medical device intended for the provision of Bi-Level CPAP to
produce a sigh. This system is for use in Hospital, Hospital Type facilities and intra-
Hospital transport environments and is indicated for the treatment of Newborn and
Infant patients.
Operators of this equipment and Service Engineers are required to read and thoroughly
understand the contents of this manual before using or maintaining the equipment.
This manual is intended for use by a competent, fully qualified Service
Engineer. It includes a description of the unit and how it works. It also contains
operating and diagnostic procedures and maintenance instructions. For usage
of associated equipment, refer to the Manufacturer’s literature.
Regulatory Notice
Federal law restricts the sale of this device except by or on order of a physician.
Classification
Type of Equipment: Medical Equipment, Class 1 and internally powered, IPX1
Protected, and uses type BF applied parts. Equipment is not suitable for use in
presence of flammable anesthetics.