User`s manual

Intel-GE Care Innovations™ QuietCare® System
Hardware Maintenance Guide
Page 40 of 60 Document: DHF-3756
Revision: 1.0 Effective: January 29, 2012
not controlled by a wall switch.
3. If dialing an outside line requires a prefix or if
only pulse dialing is available
a. Unplug the base and plug it in again.
b. Press S6 twice during the 14-second
countdown to enter Walkaround Test mode
When prompted to set phone numbers,
press S5:
c. Enter the appropriate prefix for each of the 3
phone numbers, using S4 and S6 to step up
and down the numbers and S2 and S3 to
move from digit to digit, if you need a
multiple-digit prefix.
d. To include a pause after the prefix, enter a
comma (,) as the last digit of the prefix.
NOTE: If, for example, you need a 9 to dial out,
you should add a pause (,) - to allow the
phone system time to find a line.
4. After adding the prefix, scroll to the
Upload/Download screen, and press S3 to
dial in.
5. When the dial-in is complete, unplug the
base and plug it in again.
6. After the countdown, the unit dials the
appropriate number automatically and
updates itself - to get the latest version of its
script if necessary and to set its internal
clock.
7. Loading a new script takes a few minutes,
so if the unit is loading one continue with the
installation.
8. After the data is successfully uploaded, the
unit disconnects and begins normal
operating mode.