User`s manual

Intel-GE Care Innovations™ QuietCare® System
Hardware Maintenance Guide
Page 30 of 60 Document: DHF-3756
Revision: 1.0 Effective: January 29, 2012
Push bracket firmly for 15-20 seconds: Remove backing from VHB tape:
Clip in sensor and orient correctly: Example: sensor at 45 ° toward door:
Mounting PIR sensor on Using VHB Tape

Masonry/Cement
Masonry or other rough or crumbly surfaces must be avoided. If you can’t find an appropriate alternative
surface, contact your Help desk for suggestions on how to proceed.
