User`s manual

Intel-GE Care Innovations™ QuietCare® System
Hardware Maintenance Guide
Page 24 of 60 Document: DHF-3756
Revision: 1.0 Effective: January 29, 2012
Positioning:Door
To determine the most appropriate placement for the door sensor you will need to interview the senior. When
you’re interviewing the senior, be sure to explain why you need the information, how it will be helpful to the
senior.
In the interview, determine the things the senior does most often in preparing a meal. Such things to consider
would be:
 Use of the refrigerator
o NOTE: If the senior always uses the refrigerator in preparing meals, this is the best location.
 Opening of a certain cupboard or drawer
 Use of certain utensils
 Sitting at the kitchen table if the senior uses the table only for meals.
 Install with magnet within 0.5 inch (1.25cm) activation range.
 Place the sensor in/on the refrigerator — to pick up movement indicative of eating.
 After determining the appropriate placement, screw in, or attach the sensor.
DoorSensorLED
Note that the door sensor will blink once (with very short blink) each time the door contact switch
changes state, or the trembler exceeds threshold (if enabled).