Operation Manual

CARDO COMMUNITY WEB PLATFORM
Visit http://community.cardosystems.com
*Minimum Requirements: Windows® XP™ / Mac OS X 10.7
Cardo
SmartSet
App
CARDO SMARTSET APP
In the App, you can also:
• Set volume levels for each audio source
• Control your music
• Make Phone / Intercom calls
• Find / Change radio stations
• Add/Remove Intercom pairings
Minimum Requirements:
Android: 3.0, iOS: 8.0
* App available only on iOS
and Android devices
SETTINGS MENU
The Settings menu is built in to your scala rider and is available in
several languages.
Enter Menu
In Standby, press
n
and
v
for 5 seconds
Exit Menu
Press
n
for 2 seconds
4. GETTING STARTED
4.1 GENERAL FUNCTIONS
Power ON / OFF
Press
v
for 2 seconds
ON: 3 BLUE ashes + Ascending tone
OFF: 3 RED ashes + Descending tone
Volume
Tap
+
or
-
to adjust and set volume of
current audio source
Mute
Tap
+
and
-
simultaneously
Battery Check
In Standby, press
+
for 2 seconds:
• BLUE LED = Full charge
• PURPLE LED = Half charge
• RED LED = Almost empty
Settings Menu
In standby, press
W
and
v
simultaneously for
5 seconds and follow the audio instructions
Enable / Disable VOX
(For Intercom calls
only)
In standby, press
+
and
-
simultaneously for
2 seconds
ENABLED: Blue ash for 2 seconds
DISABLED: Red ash for 2 seconds
4.2 STATUS LIGHTS
None scala rider is OFF
1 BLUE ash every 3 seconds Standby mode - No active audio
2 BLUE ashes every
3 seconds
Active mode – Call in progress / music
or other audio source is ON
1 RED ash every 3 seconds Standby mode – Battery is low
2 RED ashes every 3 seconds Active mode – Battery is low
Solid RED Charging
scala rider
®
Q3 / Q3 MultiSet™ | 5