Operation Manual
Cardo
SmartSet
App
CARDO SMARTSET APP
In the App, you can also:
• Set volume levels for each audio source
• Control your music
• Make Phone / Intercom calls
• Find / Change radio stations
• Add/Remove Intercom pairings
SETTINGS MENU
The Settings menu is built in to your scala rider and is available in
several languages.
Enter Menu
In Standby, press
n
and
v
for 5 seconds
Exit Menu
Press
n
for 2 seconds
4. GETTING STARTED
4.1 GENERAL FUNCTIONS
Power ON / OFF
Press
v
for 2 seconds
ON: 3 BLUE ashes + Ascending tone
OFF: 3 RED ashes + Descending tone
Volume
Tap
+
or
-
to adjust and set volume of
current audio source
Mute
Tap
+
and
-
simultaneously
Battery Check
In Standby, press
+
for 2 seconds:
• BLUE LED = Full charge
• PURPLE LED = Half charge
• RED LED = Almost empty
Settings Menu
In standby, press
W
and
v
simultaneously for
5 seconds and follow the audio instructions
Enable / Disable VOX
(For Intercom calls
only)
In standby, press
+
and
-
simultaneously for
2 seconds
ENABLED: Blue ash for 2 seconds
DISABLED: Red ash for 2 seconds
4.2 STATUS LIGHTS
None scala rider is OFF
1 BLUE ash every 3 seconds Standby mode - No active audio
2 BLUE ashes every
3 seconds
Active mode – Call in progress / music
or other audio source is ON
1 RED ash every 3 seconds Standby mode – Battery is low
2 RED ashes every 3 seconds Active mode – Battery is low
Solid RED Charging
6
| scala rider
®
Q1 / Q1 TeamSet™