Operation Manual
10. NOTICES
Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modications not expressly approved by the part responsible for
compliance could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired operation
of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specic operating instructions for satisfying RF exposure
compliance. The antenna used for this transmitter must not transmit simultaneously with any other
antenna or transmitter, except in accordance with FCC/IC multi-transmitter product procedures.
Instructions concerning human exposure to radio frequency electromagnetic elds - to comply with FCC
Section 1.310 for human exposure to radio frequency electromagnetic elds, a distance of at least 3 cm.
between the equipment and all persons should be maintained during the operation of the equipment.
Industry Canada (IC)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired operation
of the device.
IC RF Radiation Exposure Statement:
This equipment complies with the RSS-102 exemption from routine RF exposure evaluation for use in an
uncontrolled environment.
European CE Notice
Your Cardo product (the “Product”) is in conformity with the following essential requirements of
Council Directive 1999/5/EC (referred to as R&TTE Directive): Articles 3.1a, 3.1.b and 3.2. The Product is
manufactured in accordance with Annex II of the above directive.
Product Weight (main module): 55.2g (1.84 oz)
Operating temperature: The Product is designed to work in temperatures between -20° and 55° C (-4°
and 131° F).
Charging temperature: Battery charging temperature limits: 0° - 45°C (32°-113°F)
AC/DC Adapters: When charging from a wall outlet, use the charger provided or another certied plug-
in AC/DC adapter that meets the following criteria:
Input: 100-240 V, 50/60 Hz, 0.2 A maximum
Output: 5 DV DC, 1 A maximum.
Declaration of Conformity (DOC)
The Product is compliant with and adopts the Bluetooth® Specication 3.0. Class 1 + EDR and has
successfully passed all interoperability tests that are specied in the Bluetooth® specication. However,
interoperability between the device and other Bluetooth®-enabled products is not guaranteed.
Copyright
The contents of this User Guide, including all text, illustrations and drawings are the exclusive
intellectual property of Cardo Systems, Inc. (the “Company”) and are protected by copyright laws. They
are not in the public domain. Any partial or total reproduction, translation and or dissemination, without
the prior written authorization by the Company are strictly prohibited. Any rights not expressly granted
herein are reserved.
IMPORTANT SAFETY AND WARRANTY INFORMATION –
WAIVER AND GENERAL RELEASE
WARNING:
Cardo Systems Inc., (“Cardo” or the “Company”) noties you that your complete and undivided attention
is required when using a communication device (the “Product”) while riding. Failure to avoid potentially
hazardous situations could result in accident resulting in serious injury or death.
Cardo advises you to take all necessary precautions and remain alert to the trac, weather and all road
conditions. It is best to stop away from trac prior to activating or deactivating the Product or initiating
or receiving any calls.
Do not perform pairing, linking or similar operations while riding. All publications are intended to address
technical capabilities and should not be construed as encouraging the operation of Cardo’s Products in any
manner that is unsafe or prohibited by law.
16
| scala rider
®
G9x / G9x PowerSet