Operation Manual

English
and start A2DP music playback from the other device. Turning o the
headset will set the default back to the A2DP Music Player.
Operating your A2DP source from your G4
Play Press and hold the MP3 Button for 3 seconds
Pause/Stop* Press and hold the MP3 Button for 3 seconds
Forward Press and hold the Volume Up Button for 3 seconds
Rewind** Press and hold the Volume Down Button for 3 seconds
* Varies depending on your mobile phone model
** With some phones you may need to repeat this action once more
7. BUILT-IN FM RADIO AND EXTERNAL MP3
PLAYER (CABLE OPTION)
7.1 FM RADIO
The scala rider G4 is equipped with an FM
stereo radio receiver and RDS (Radio Data System)
technology, allowing you to choose how and when you listen to
your favorite stations.
Turn on Radio While in Standby mode, press and hold CHANNEL
“B” button for 3 seconds
Turn o Radio While listening to the Radio, press and hold
CHANNEL “B” button for 3 seconds
Switch to next
preset station
While listening to the Radio, tap the CHANNEL “B”
button to cycle through the 6 Preset FM Stations
Start Intercom call While listening to the Radio, start talking loudly
Initiate Voice Dial
from your Mobile
Phone
While listening to the Radio, tap the Mobile Button
and pronounce loudly the name of the person you
wish to call. This feature is supported only by mobile
phones that include the Voice Dial feature
Initiate Redial from
your Mobile Phone
While listening to the Radio, tap the Mobile
Button twice
RDS ON/OFF
(Default: OFF)
While the Radio is on, press and hold Volume Up
and Volume Down Buttons simultaneously for 3
seconds (Also controlled via the PC software and
Settings Customization Voice Menu)
Thanks to the RDS feature, the G4 will automatically select the
strongest signal available for the FM station you wish to listen to, no
matter where you are riding.
RDS ON/OFF (press simultaneously 3 seconds while radio is on)
• ON/OFF FM Radio
(press 3 sec.)
• Switch among pre-saved
stations (tap briey)
Searching for and saving new stations
Radio station pre-sets can be saved using the Cardo Upgrades PC
software or directly from your G4 device.
11
scala rider
®
G4