Manualshelf

Operation Manual

ManualsBrandsCardo ManualsAudioScala Rider Freecom 2
12345678910
3. On the other Cardo unit, activate Bluetooth intercom pairing mode (see the other Cardo unit user manual at
cardosystems.com/product-manuals/).
4. The unit confirms that pairing has succeeded and the LED flashes for 2 seconds.
● To cancel the pairing process, press for 2 seconds. The LED stops flashing.
● If pairing is not completed within 2 minutes, the unit automatically returns to Standby.
● To reset all Bluetooth intercom pairing while in Bluetooth intercom pairing mode:
● Press and for 2 seconds. The LED flashes purple 5 times slowly, confirming that pairing has been
reset .
To pair your FREECOM 2 with Cardo units through the SmartSet app:
1. Confirm your unit is in Standby mode (LED flashes slowly).
1. Open the SmartSet app and tap .
2. Tap Bluetooth.
3. Under Riders, tap Add (or Change if you are changing to whom the channel is paired) and follow the on screen
menus.
4. On the other Cardo unit, activate Bluetooth intercom mode (see the other Cardo unit user manual at
cardosystems.com/product-manuals/).
5. The unit confirms that pairing has succeeded and the LED flashes for 2 seconds.
● To reset all Bluetooth intercom pairing, tap Delete all.
To pair your FREECOM 2 with Cardo units through the voice-assisted menu:
1. Confirm your unit is in Standby mode (LED flashes slowly).
2. Tap and .
3. When the voice-assisted menu reaches "Advanced Features", tap or use VOX.
4. When the voice-assisted menu reaches "Pair Intercom Channel A", tap or use VOX.
5. On the other Cardo unit, activate Bluetooth intercom pairing mode (see the other Cardo unit user manual at
cardosystems.com/product-manuals/).
6. The unit confirms that pairing has succeeded and the LED flashes for 2 seconds.
3.6.2 PAIRING THE BLUETOOTH INTERCOM TO NON-CARDO UNITS
The Cardo gateway enables Cardo units to connect to non-Cardo units over Bluetooth.
To pair your FREECOM 2 with non-Cardo units through the unit buttons:
1. Confirm your unit is in Standby mode (LED flashes slowly).
2. On your unit, press for 5 seconds. The LED flashes red.
3. Tap to activate the Cardo gateway. The LED flashes red and blue.
4. On the non-Cardo unit, activate Bluetooth mobile pairing mode (see the non-Cardo unit user manual).
5. The unit confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
9