Operation Manual

● If pairing is not completed within 2 minutes, the unit automatically returns to Standby.
● If you have paired two different mobile phones directly to your FREECOM 2, set one as default for making
calls (see Setting the Default Mobile Phone on page 21).
● Not all Bluetooth mobile phones broadcast Bluetooth Stereo music (A2DP), even if the phone has an MP3
player function. Consult your mobile phone’s user manual for more information.
● Not all Bluetooth GPS devices allow connection to Bluetooth audio devices. Consult your GPS User Manual for
more information.
To cancel the pairing process:
● Press for 2 seconds. The LED stops flashing red and blue or red and green.
To reset all Bluetooth device pairing:
● Press and for 5 seconds.
In all battery states, the LED flashes purple slowly five times, confirming that pairing has been reset.
Resetting all Bluetooth device pairing also resets all Bluetooth intercom pairing.
3.5.2 PAIRING THROUGH THE VOICE-ASSISTED MENU
To pair your FREECOM 2 with devices through the voice-assisted menu:
1. Tap and .
2. When the voice-assisted menu reaches "Advanced Features", tap or use VOX.
3. When the voice-assisted menu reaches the required option, tap or use VOX.
● To reset all Bluetooth pairing, select the menu option "Reset Mobiles and GPS Pairing".
3.6 PAIRING THE BLUETOOTH INTERCOM
The FREECOM 2 allows full-duplex Bluetooth intercom communication for chatting with another rider on Cardo or
non-Cardo units.
To connect your unit to another unit with a Bluetooth intercom, you must first pair their channels.
● Pairing a channel replaces any existing paired unit on that channel with the new unit.
● If you have purchased the FREECOM 2 MultiSet, the retail package contains two pre-paired units.
● Your FREECOM 2 is compatible with most Cardo models for Bluetooth intercom calls. In addition, it is also
compatible with the Schuberth SRC-System™.
For details on how to pair and use your FREECOM 2 with other Cardo units, go to
www.cardosystems.com/freecomcompatibility.
3.6.1 PAIRING THE BLUETOOTH INTERCOM TO OTHER CARDO UNITS
To pair your Unit with Cardo units through the unit buttons:
1. Confirm your unit is in Standby mode (LED flashes slowly).
2. On your unit, press for 5 seconds. The LED flashes red.
8