Operation Manual
2. CHARGING THE FREECOM 2
Make sure that your FREECOM 2 battery is charged for at least 4 hours before initial use.
To charge the FREECOM 2:
1. Using the supplied USB cable, connect your computer or a wall charger to the FREECOM 2 USBport.
● Charging with the wall charger is faster than via a computer USB port.
● Charging your unit switches it off automatically. To use your unit while it is being charged, switch it on. (see
Switching Your Unit On/Off on page 6).
During charging, the LED indicates charging status as follows:
● red LED on - charging
● red LED off - charging complete
5