Operation Manual

4.6 SETTING THE DEFAULT MOBILE PHONE
If you paired your unit to two mobile phones, you must set one of them as the default phone for outgoing calls.
To set the default phone through the SmartSet app:
1. Confirm your unit is in Standby mode (LED flashes slowly).
2. Open the SmartSet app and tap :
3. Tap .
4. Tap PRIORITY for the default mobile phone.
To set the default phone through the unit:
● During a mobile call, press for 5 seconds.
4.7 CHECKING BATTERY STATUS THROUGH THE SMARTSET APP
Battery Status on Your Mobile Phone
If you installed the SmartSet app on your mobile phone, the unit battery indicator appears in the SmartSet app
bottom right-corner, as well as in the notification bar.
If your FREECOM 2 battery level reaches 20%, you hear a battery status voice announcement warning you that your
battery is low.
21