Operation Manual
If a new firmware version is available, follow the instructions on the screen to update your FREECOM 2 with the
latest features.
4.2.3 CONFIGURING YOUR FM RADIO THROUGH CARDO COMMUNITY
To configure the six FMradio preset radio stations using Cardo Community:
1. Scroll down to FMRADIOPRESETS section.
2. On FMBand:
● If you are in Japan, select Japan.
● Otherwise, select Worldwide.
3. On the preset station you want to edit, click .
4. Enter the desired FM station's frequency and press Enter.
You can also use the left and right blue arrows on the frequency scale to update the preset frequency.
5. To delete a preset station, click .
Preset radio station 1 cannot be deleted.
4.3 CONFIGURING YOUR FREECOM 2 THROUGH THE CONFIGURATION VOICE MENU
You can configure your FREECOM 2 using the configuration voice menu in combination with either unit buttons or
using VOX.
To configure your FREECOM 2 through the Configuration Voice Menu:
1. Confirm your unit is in Standby (LED flashes slowly).
2. Press and for 2 seconds.
3. When the voice-assisted menu reaches your required option ("Language", "A2DP Audio Priority", "Spoken Status
Announcements", "Click-to-Link", "AGC", "RDS", "VOX Sensitivity", "VOX", "Parallel Audio Streaming"), tap or
use VOX to select.
4.4 USING PARALLEL AUDIO STREAMING
With parallel audio streaming, you can hear GPS instructions during a mobile or Bluetooth intercom call, or while
listening to other audio sources, such as music or FM radio.
19