User guide

1. INTRODUCTION
Thank you for choosing the scala rider Qz® Bluetooth® entertainment
system for motorcycle helmets. This manual will help you set up,
congure and operate it.
➊ ➋ ➌
➍
➎
➏
1 Power Button
2 LED
3 Music / Mobile Button
4 Volume Up
5 Micro USB / AUX (•)
6 Volume Down
2. CHARGING THE SCALA RIDER
Make sure that your scala rider is fully charged for at least 4 hours
before initial use.
Charging with the wall charger is faster than via a computer USB port.
• RED LED ON – Charging • RED LED OFF – Charging complete
Battery
Check
In Standby, press for 2 seconds
• BLUE = Full • PURPLE = Half • RED = Almost empty
The scala rider Qz is waterproof and dustproof. However,
when in use, the USB silicone cover should be kept tightly
closed to prevent moisture from entering the unit.
scala rider
®
Qz | 3