User Guide
CONTENTS 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 2. CHARGING THE BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. CUSTOMIZATION AND SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3.
1. INTRODUCTION English Thank you for choosing the scala rider PACKTALK™ communication and entertainment system for motorcycle helmets. If you have purchased the PACKTALK DUO, your retail box contains two factory-paired units. The scala rider PACKTALK offers the following key features: INTERCOM OPTIONS Dual DMC™ (Dynamic Meshwork Communication) and Bluetooth® intercom technologies on board - with a range of up to 1 mile / 1.6 km* bike-to-bike in full duplex.
Flip-up Antenna Intercom Mobile Audio Roller-Wheel Z USB scala rider PACKTALK button layout 2. CHARGING THE BATTERY Make sure that the battery is fully charged for at least 4 hours before initial use. Charging with the wall charger is faster than via a computer USB port. • RED LED ON – Charging • RED LED OFF – Charging complete. Android App users can find a battery indicator in the bottom right-hand corner of the App.
3.
3.3 MENU NAVIGATION roller-wheel (Z) to access and navigate the built-in menus to easily operate  Useandthecustomize your scala rider PACKTALK. The Feature menu will vary according to which mode you are in (Standby/A2DP Music/FM). The Settings menu and Advanced Settings menu can be accessed only in Standby Mode. Menus are available in several languages.
4. GETTING STARTED 4.
4.4 VOICE COMMANDS The Voice Commands allow you to perform certain actions by simply using your voice. Using advanced Voice Recognition, you can control the PACKTALK completely handsfree. The default Voice Command language is English. Other languages are also available - see section 3 to adjust settings. Throughout this manual, features which are available via Voice Command are marked with the ß icon. 1. With no call in progress, tap Z or speak any word loudly to activate VOX 2.
4.5 VOICE CONNECT (VOX) The PACKTALK has VOX technology for safe and hands-free operation of some key functions. See section 3 to adjust VOX settings.
5.1 DMC INTERCOM MODE The default intercom mode is Bluetooth Intercom. To switch to DMC intercom mode: • Enter the Standby Feature menu and choose ‘Switch Intercom mode’ • Use the Voice Command (see section 4.4) • Use the Cardo SmartSet App (see section 3.2) Introduction The scala rider PACKTALK uses DMC technology to create a spontaneous and fluid virtual network of riders. DMC enables simultaneous connectivity among a far greater number of riders than the Bluetooth intercom mode.
Create a pack In DMC mode, press v for 5 seconds to enter intercom pairing mode. While the LED is flashing, tap v to define yourself as the Pack Creator. Join a pack While the Pack Creator is in Pairing mode, press v for 5 seconds on your unit. The LED will flash Purple to indicate that pairing with the Pack Creator has been successful. Mute / Unmute the pack ß Double-tap v Leave a pack Via the Advanced Features Menu Switch Intercom mode ß Via the Advanced Features Menu.
5.2a “1+8” INTERCOM TOGGLING (with PACKTALK, G9 / G9X and cardo SHO-1) Pair with up to 8 other devices (“1+8” Buddies) and connect with them one at a time by saying their name. CONFIGURE YOUR BUDDY NAME Before using “1+8” Intercom, you should assign yourself a Buddy name, so that other paired Buddies can call you by this name. Visit the Cardo Community to configure your Buddy Name (see Section 3). Until you configure a Buddy name, your unit will be known as “PACKTALK”.
English INTERCOM-TO-PHONE In Bluetooth Intercom mode, if a “1+8” Buddy is not in range, or moves out of range, you have the option to set up the “Intercom-to-Phone” feature via the Cardo Community, to remain in contact by diverting Intercom calls automatically to your mobile phones. 5.2b INTERCOM WITH CHANNELS “A” AND “B” Start multi-party conversations using Intercom Channels “A” and “B”. This mode is suitable for 2, 3 or 4-way calls.
CALLING INTERCOM CHANNELS “A” AND “B” OPTION 1: Voice Connect (VOX) Say any word loudly into the microphone. When you hear the Voice Command tone, say “Call Intercom” to start an intercom call with “A” and/or “B” (subject to who is present). VOX Intercom calls with only “A” or “B” will end automatically after 30 seconds of silence. g OPTION 2: Via the Cardo SmartSet App (see 3.
FOUR-WAY INTERCOM English Pairing 1. Pair Rider 1 to Passenger 2 using Channel “A” 2. Pair Rider 3 to Passenger 4 using Channel “A” 3. Pair Passenger 2 to Passenger 4 using Channel “B” In this configuration the two passengers (2 and 4) are each using two Bluetooth connections: Calling 1. Make sure the four units are not in an active phone or intercom call. 2. Passenger 2 should double-tap v to call Passenger 4. Wait until audio is heard on both units. 3. Rider 1 should tap v to call Passenger 2. 4.
6. USING A MOBILE PHONE, GPS OR MP3 PLAYER To use a Bluetooth device with your scala rider PACKTALK you must first pair them. Once paired, they will automatically recognize each other whenever they are within range (10m / 33ft). Your scala rider has two Bluetooth channels to connect mobile phones, GPS devices and music players with A2DP. 6.1 PAIRING BLUETOOTH CHANNELS 1 AND 2 1. Make sure Bluetooth is enabled on your phone/GPS/MP3 player. 2. C heck the unit is in Standby (single flash every 3 seconds).
6.3 LISTENING TO MUSIC VIA A2DP Available only with A2DP/AVRCP compatible Bluetooth audio devices In standby, tap π or use the Voice Command / Feature Menu Pause/Stop ß Press π for 2 seconds or use Voice Command Next Track ß With music ON, tap π or use Voice Command Previous Track* ß With music ON, double-tap π or use Voice Command Music Scan With music ON, tap and roll Z forward (scans up) or back (scans down). The first few seconds of each audio track will be played.
7. FM RADIO Your scala rider includes a built-in FM radio with a 6 Preset memory and RDS (Radio Data System). RDS allows the radio to automatically retune to the strongest frequency available for the FM station you are listening to when the signal becomes too weak.
9. SUPPORT English For additional information: www.cardosystems.com support@cardosystems.com SA and Canada: 1-800-488-0363 UInternational: +49 89 450 36819 IMPORTANT MULTINATIONAL COMMERCE COMPANIES AND ONLINE AUCTION WEBSITES ARE NOT AUTHORIZED TO SELL CARDO PRODUCTS AND PURCHASES FROM SUCH SITES ARE AT YOUR OWN RISK. TO RECEIVE WARRANTY OR CUSTOMER SERVICE, YOU MUST SUBMIT ORIGINAL RECEIPTS FROM AUTHORIZED CARDO DEALERS. PRODUCTS THAT WERE IMPORTED FROM NORTH AMERICA MUST BE SERVICED IN THE USA.
AC/DC Adapters: When charging from a wall outlet, use the charger provided or another certified plug-in AC/DC adapter that meets the following criteria: Input: 100-240 V, 50/60 Hz, 0.2 A maximum Output: 5 DV DC, 1 A maximum. Declaration of Conformity (DOC) The Product is compliant with and adopts the Bluetooth® Specification 4.0 and has successfully passed all interoperability tests that are specified in the Bluetooth® specification.
| 21 English The warranties and remedies contained herein are exclusive and in lieu of all other warranties express, implied or statutory, including any liability arising under any warranty of merchantibility or fitness for a particular purpose, statutory or otherwise that Cardo specifically disclaims. This warranty gives you specific legal rights which may vary from state to state or from jurisdiction to jurisdiction.
2. You fully understand and assume the risks in using the Product, including risk of negligent acts or omissions by others. All risks for operating the Product are assumed solely by the user of the Product. 3. You confirm that you are physically capable to use the Product and that you have no medical conditions or needs that may infringe upon your abilities to do so in a safe manner.
