User guide

4. BASIC SETUP AND CONFIGURATION
4.1 GENERAL FUNCTIONS  HEADSET
DESIRED RESULT REQUIRED ACTION
Turn on the headset
Press the Control Button steadily for at least
four seconds
LED indication: Three blue ashes.
Audio feedback: Ascending tone (low-high).
Turn o the headset
Press the Control Button steadily for at least
three seconds
LED indication: Three red ashes.
Audio feedback: Descending tone
(high-low).
Distinguish between
the Instructor and
Trainee’s units
After turning on the headsets and receiving
an LED indication of 3 blue ashes, each
headset will display a constant light for 2
seconds as follows:
Blue and Red one simultaneous ash – In-
structor’s headset
Blue and Red two simultaneous ashes –
Trainee 1 headset
Blue and Red three simultaneous ashes –
Trainee 2 headset*
Increase the volume Tap the Volume Up Button
Decrease the volume Tap the Volume Down Button
Mute the Headset Tap simultaneously Volume Up and Volume
Down while audio is on
Battery Level Indica-
tor (Headset)
Press and hold the Volume Up Button for
three seconds
Blue light = Battery is fully charged
Red/blue light = Battery is half full
Red light = Battery is almost empty
* Refers to the scala rider G4 Instructor Kit package for 2 trainees
4.2 GENERAL FUNCTIONS  SPEAKERPHONE
DESIRED RESULT REQUIRED ACTION
Turn on the
speakerphone
Press and hold the Control Button steadily
for at least six seconds
LED indication: Five rapid blue ashes
Turn o the
speakerphone
Press and hold the Control Button steadily
for at least six seconds
LED indication: Five rapid red ashes
Increase the Speaker-
phone Volume
Tap the Volume Up Button
Decrease the Speak-
erphone Volume
Tap the Volume Down Button
Mute the Speaker-
phone’s microphone
Tap the Mute Button
LED indication: solid red light
4.3 SOFTWARE UPGRADE OPTION
In the future you will be able to install
software upgrades and program patches
to keep the software of your Instructor and
Trainee headsets up-to-date. To ensure that
you don’t miss out on the latest versions, please register online
at www. cardosystems.com/download/softwareupgrade
and have your serial number ready. For downloading upgrades,
please use the USB cable included in the retail package of your
scala rider G4 Instructor Kit and follow the Instructions.
Please note that until further notice, upgrades will only be
available for Windows® based computers with 32bit Windows
XP™, Windows 7 or Vista™ operating systems.
6
scala rider
®
G4
™
Instructor Kit