User guide
English
Instructor’s set contains:
3 Microphone sponges:
2 Flat sponges for full-face helmets and round
sponge for other helmet types
User Guide, Warranty and Registration form
Each Trainee’s set contains:
Wall charger plug
USB adapter cable
Allen wrench
Velcro pads
Glue plate
Pre-moistened Towlette
Carry pouch
2 Microphone sponges:
Flat sponge for full-face helmets and round
sponge for other helmet types
IMPORTANT:
The Instructor and Trainee headsets are waterproof and dustproof
devices (certied as IP67). The cover protecting the Charging Jack
should be kept tightly closed at all times to prevent moisture from
entering the device.
3. CHARGING HEADSET AND
SPEAKERPHONE
Make sure that your headset and speakerphone are fully
charged for at least four hours before initial use.
The speakerphone has two charging options: 12V
car charger or solar power. The solar charging
panel allows eortless charging of the speaker-
phone as long as the solar panel of the speaker-
phone is situated in direct sunlight. When
charging, the LED on the speakerphone will
show a constant red light.
To charge your headset, open the cover
protecting the Charging Jack and Software Download
Port. Insert the USB cable to the wall charger/car charger
and insert the other end of the cable to the headset’s Charging
Jack. While charging, the Red light turns on. When charging is
complete, the Red light will turn o.
Your USB adaptor cable serve two purposes:
1. Charging your headset from any A/C wall socket or from a
USB port on your computer (charging time from computer
takes longer)
2. Downloading software upgrades from any 32 bit
Windows® XP , Windows® 7 or Vista™ based computer
5
scala rider
®
G4
™
Instructor Kit